Rexroth DBW10B1-5X/50-6EG24N9K4 PRESSURE RELIEF VALVE
How do you find the SD 40x47x4 Designation associated SD design radial shaft seal with a low cross-sectional height Rexroth DBW10B1-5X/50-6EG24N9K4 PRESSURE RELIEF VALVE TER Pump Manufacturing Factory specification? Manufacturers 18 mm U Online Free check！
| Brand Name: | Rexroth |
| Model Number: | DBW10B1-5X/50-6EG24N9K4 |
| Weight: | 118.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Model No.: | 4535VQ60A38-11AA20-LH |
| Port Size: | 4 |
| Port Type: | Flange |
| Shaft Key: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 118.0 LB |
| Mounting | Flange Mount |
| Rotation | Left Hand (CCW) |
| Model No. | 4535VQ60A38-11AA20-LH |
| Port Size | 4 |
| Port Type | Flange |
| Shaft Key | N/A |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Pump Series | 4535VQ |
| Shaft Length | 1 15/16 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2200 |
| Minor Diameter | 1.04 in |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | 12/24 |
| Cover End RPM [Max | 2200 |
| Shaft End RPM [Max | 2200 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Major Diameter [Min | 1.247 in |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Manufacturer Part No. | 4535VQ60A38-11AA20-LH |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 57 |
| GPM @ 1,800 rpm, Shaft End | 90 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet Opposite Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 1/4 in Flange |
| Pressure Port Size, Shaft End | 1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) | 7.4 |
| Displacement Shaft End (cu in/revolution) | 11.8 |