DEUTZ 0 445 110 049 injector
QuestionDEUTZ 0 445 110 049 injector ? Find what you need faster by entering 20.5 mm A4 your M6x1 G DEUTZ injector information TER Pump Manufacturing Factory .
| Brand Name: | DEUTZ |
| Model Number: | 0 445 110 049 |
| Weight: | 35.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | V2020-1F7S7S-11DD30 |
| Port Size: | 2 |
| Port Type: | Flange |
| Shaft Key: | N/A |
| Pilot Type: | N/A |
Product Details
| Weight | 35.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | V2020-1F7S7S-11DD30 |
| Port Size | 2 |
| Port Type | Flange |
| Shaft Key | N/A |
| Pilot Type | N/A |
| Shaft Dia. | 0.875 in |
| Shaft Type | 13 Tooth Splined |
| Pump Series | V2020 |
| Shaft Length | 1 5/16 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 3000 |
| Minor Diameter | 0.728 in |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | 16/32 |
| Cover End RPM [Max | 2500 |
| Shaft End RPM [Max | 3000 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 0.873 in |
| Major Diameter [Min | 0.872 in |
| Minor Diameter [Max | 0.7335 in |
| Minor Diameter [Min | 0.7225 in |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | V2020-1F7S7S-11DD30 |
| Cover End Pressure [Max | 2500 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 10.5 |
| GPM @ 1,800 rpm, Shaft End | 10.5 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in SAE O-Ring |
| Pressure Port Size, Shaft End | 3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) | 1.39 |
| Displacement Shaft End (cu in/revolution) | 1.39 |