COMMON RAIL 0445110175 injector
Advance Mobilith SHC PM 220 Grease Type COMMON RAIL 0445110175 injector is your source for quality COMMON RAIL injector and accessories. shop online for Powder Coat Housing Coating home delivery or TER Pump Manufacturing Factory pick up in one of our 10000 . Steel Bearing Inner Ring Material
| Brand Name: | COMMON RAIL |
| Model Number: | 0445110175 |
| Weight: | 76.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 3525VQ35A21-1CC20 |
| Port Size: | 3 |
| Port Type: | Flange |
| Shaft Key: | 5/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 76.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 3525VQ35A21-1CC20 |
| Port Size | 3 |
| Port Type | Flange |
| Shaft Key | 5/16 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 3525VQ |
| Shaft Length | 2.5 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2400 |
| Minor Diameter | N/A |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 2500 |
| Shaft End RPM [Max | 2400 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3525VQ35A21-1CC20 |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| GPM @ 1,800 rpm, Shaft End | 52.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 4.1 |
| Displacement Shaft End (cu in/revolution) | 6.9 |