Rexroth Z2DB10VD2-4X/315 PRESSURE RELIEF VALVE
Find the discount 1600 rpm Sealed Speed Rating n3 Rexroth Z2DB10VD2-4X/315 PRESSURE RELIEF VALVE online TER Pump Manufacturing Factory you need . We offer ... 1600 rpm Grease Speed Rating n1 If you check out our large selection of Rexroth Z2DB10VD2-4X/315 PRESSURE RELIEF VALVE once .
| Brand Name: | Rexroth |
| Model Number: | Z2DB10VD2-4X/315 |
| Weight: | 75.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 3520VQ38A11-11DD20 |
| Port Size: | 3 |
| Port Type: | Flange |
| Shaft Key: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 75.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 3520VQ38A11-11DD20 |
| Port Size | 3 |
| Port Type | Flange |
| Shaft Key | N/A |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Pump Series | 3520VQ |
| Shaft Length | 1.9375 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2400 |
| Minor Diameter | 1.04 in |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | 12/24 |
| Cover End RPM [Max | 2500 |
| Shaft End RPM [Max | 2400 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Major Diameter [Min | 1.247 in |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3520VQ38A11-11DD20 |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.2 |
| Displacement Shaft End (cu in/revolution) | 7.4 |