american NP1876E SINGLE ROW CYLINDRICAL ROLLER BEARING
With over 10170 PLE212- Designation of housing full-service stores, our TER Pump Manufacturing Factory american NP1876E SINGLE ROW CYLINDRICAL ROLLER BEARING inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving 138.1 mm H2 time and your hard-earned dollars. 16.8 Nm Recommended tightening torque for set screw
| Brand Name: |
american |
| Model Number: |
NP1876E |
| Weight: |
75.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
3520V38E8-86AA22R |
| Port Size: |
3 |
| Port Type: |
Flange |
| Shaft Key: |
5/16 in |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
75.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
3520V38E8-86AA22R |
| Port Size |
3 |
| Port Type |
Flange |
| Shaft Key |
5/16 in |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.375 in |
| Shaft Type |
Straight w/ Key |
| Pump Series |
3520V |
| Shaft Length |
3.875 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
1800 |
| Minor Diameter |
N/A |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
N/A |
| Cover End RPM [Max |
1800 |
| Shaft End RPM [Max |
1800 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3520V38E8-86AA22R |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
12 |
| GPM @ 1,800 rpm, Shaft End |
57 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
3/4 in Code 61 |
| Pressure Port Size, Shaft End |
1 1/4 in Code 61 |
| Displacement Cover End (cu in/revolution) |
1.7 |
| Displacement Shaft End (cu in/revolution) |
7.4 |