Rexroth A10VSO18DFLR/31R-PPA12N00 Piston Pump
Advance Rexroth A10VSO18DFLR/31R-PPA12N00 Piston Pump is your source for quality DD (Contact Rubber S Seals 17 Bearing I.D. d(mm) Rexroth Piston Pump and accessories. shop online for home delivery or pick up in one of TER Pump Manufacturing Factory our 10000 6903 Bearing Part Number .
| Brand Name: | Rexroth |
| Model Number: | A10VSO18DFLR/31R-PPA12N00 |
| Weight: | 75.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 3520VQ30E11-11DD20 |
| Port Size: | 3 |
| Port Type: | Flange |
| Shaft Key: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 75.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 3520VQ30E11-11DD20 |
| Port Size | 3 |
| Port Type | Flange |
| Shaft Key | N/A |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | 14 Tooth Splined |
| Pump Series | 3520VQ |
| Shaft Length | 1 15/16 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2500 |
| Minor Diameter | 1.04 in |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | 12/24 |
| Cover End RPM [Max | 2500 |
| Shaft End RPM [Max | 2500 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| Major Diameter [Min | 1.247 in |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3520VQ30E11-11DD20 |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 45 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.2 |
| Displacement Shaft End (cu in/revolution) | 6 |