american NP18/1250 SINGLE ROW CYLINDRICAL ROLLER BEARING
With over 10170 62 mm d1 full-service stores, our american NP18/1250 SINGLE ROW CYLINDRICAL ROLLER BEARING inventory is extensive and our parts are TER Pump Manufacturing Factory priced right. within 24 hours. This helps you maximize your productivity by saving time 23.2 mm s1 and your hard-earned dollars.
| Brand Name: |
american |
| Model Number: |
NP18/1250 |
| Weight: |
76.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Left Hand (CCW) |
| Model No.: |
3525VQ38A17-11CC20-LH |
| Port Size: |
3 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Left Hand (CCW) |
| Model No. |
3525VQ38A17-11CC20-LH |
| Port Size |
3 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Pump Series |
3525VQ |
| Shaft Length |
1.9375 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2400 |
| Minor Diameter |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2500 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ38A17-11CC20-LH |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| GPM @ 1,800 rpm, Shaft End |
57 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Displacement Shaft End (cu in/revolution) |
7.42 |