BOSCH 0445110213 injector
With over 10170 full-service stores, our TER Pump Manufacturing Factory BOSCH 0445110213 injector 27 mm C inventory is extensive and our parts are priced right. within 24 hours. This helps 82 mm d1 you maximize your productivity 16.8 Nm Recommended tightening torque for set screw by saving time and your hard-earned dollars.
| Brand Name: | BOSCH |
| Model Number: | 0445110213 |
| Weight: | 45.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Model No.: | 2520V17A11-1AA22L |
| Port Size: | 2 1/2 |
| Port Type: | Flange |
| Shaft Key: | 1/4 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Mounting | Flange Mount |
| Rotation | Left Hand (CCW) |
| Model No. | 2520V17A11-1AA22L |
| Port Size | 2 1/2 |
| Port Type | Flange |
| Shaft Key | 1/4 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 2520V |
| Shaft Length | 2.32 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 1800 |
| Minor Diameter | N/A |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 1800 |
| Shaft End RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520V17A11-1AA22L |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 25.5 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 3/4 in Code 61 |
| Pressure Port Size, Shaft End | 1 in Code 61 |
| Displacement Cover End (cu in/revolution) | 2.2 |
| Displacement Shaft End (cu in/revolution) | 3.4 |
