Rexroth A10VSO18DFR1/31R-PPA12N00 Piston Pump
With over 10170 full-service stores, our Rexroth A10VSO18DFR1/31R-PPA12N00 Piston Pump inventory is extensive and our parts are priced right. within 24 hours. With Outer Ring Outer Ring This helps you maximize your productivity TER Pump Manufacturing Factory by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | A10VSO18DFR1/31R-PPA12N00 |
| Weight: | 45.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 2520V12A8-1DD22R |
| Port Size: | 2 1/2 |
| Port Type: | Flange |
| Shaft Key: | 1/4 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 2520V12A8-1DD22R |
| Port Size | 2 1/2 |
| Port Type | Flange |
| Shaft Key | 1/4 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 2520V |
| Shaft Length | 2.32 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 1800 |
| Minor Diameter | N/A |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 1800 |
| Shaft End RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520V12A8-1DD22R |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 12 |
| GPM @ 1,800 rpm, Shaft End | 18 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Code 61 |
| Pressure Port Size, Shaft End | 1 in Code 61 |
| Displacement Cover End (cu in/revolution) | 1.7 |
| Displacement Shaft End (cu in/revolution) | 2.5 |
